SINGLE GEARED SINGLE END DRIVE - FORM A-13-L-2
Overview
Single Geared Single End Drive – Form A-13-L-2 specification information. To download a PDF or for information about how to find your serial number, please use the appropriate button below.
NOTE: FLYWHEEL Bearing Lubrication (Once each year) Presses with clutch on driveshaft Serial Nos. 47200 thru 52000-remove cover from clutch and lubricate through fitting on end of driveshaft. Presses with Serial Nos. 52000 and above lubricate through fitting located on end of driveshaft behind center openeing in disc brake. Use Chevron SRI No. 2 grease. Reassemble parts that have been removed before operating press.
QUILL MOUNTED FLYWHEELNOTE: Some models have provisions for lubricating flywheel bearing located on backplate of flywheel guard or rear of housing under flywheel. On models without these provisions the flywheel must be removed and bearings replaced once each year. Use Chevron SRI No. 2 grease.
*Refer to FORM A-36 for removal and installation.
A-13-L-2 SINGLE GEARED-SINGLE END DRIVE | |
---|---|
1 | Brake |
2 | Capscrew |
3 | Retaining Ring |
4 | Brake Hub |
5 | Bolt |
6 | Brake Mounting Plate |
7 | Bolt |
8 | Inboard Bearing Cartridge |
9 | "O" Ring |
10 | Retaining Ring |
11 | Bearing |
12 | Retaining Ring |
13 | Key |
14 | Drive Shaft |
15 | Key |
16 | Retaining Ring |
17 | Bearing |
18 | Spacer or Retaining Ring |
19 | Outboard Bearing Cartridge or Quill |
20 | Bolt |
21 | Hose Ring |
22 | Bearing |
23 | Flywheel |
24 | Bearing |
A-13-L-2 SINGLE GEARED-SINGLE END DRIVE | |
---|---|
25 | Clutch Hub |
26 | Retaining Ring |
27 | Clutch |
54 | Crankshaft |
55 | Dowel |
56 | Bushing |
57 | Bushing |
58 | Bushing |
59 | R.H. Outer Bearing Cap |
60 | Bolt |
61 | Center Bearing Cap |
62 | L.H. Outer Bearing Cap |
63 | Main Gear |
64 | Shrink Disc |
65 | Grease Fitting (when used) |
60 | Bolt |
61 | Center Bearing Cap |
62 | L.H. Outer Bearing Cap |
63 | Main Gear |
64 | Shrink Disc |
65 | Grease Fitting (when used) |
BCN Technical Services
1004 E State St Hastings, MI 49058
Sign-up to receive sales, updates and important information from BCN Technical Services.
Hours of Operation
Monday–Friday:
8 a.m.–5 p.m.
Saturday–Sunday:
Closed
BCN Technical Services, Inc. 1004 E State St Hastings, MI 49058
269-948-3300
info@bcntechserv.com