Double Geared Twin End Drive Shaft Mounted Flywheel - Form A-13-K-1-A-1

Overview

Double Geared Twin End Drive Shaft Mounted Flywheel – Form A-13-K-1-A-1 specification information. To download a PDF or for information about how to find your serial number, please use the appropriate button below.

Figure 1

NOTE: Flywheel Bearing Lubrication (Once Each Year) Presses with clutch or driveshaft Serial Nos. 47200 thru 52000-remoe cover from clutch (Part No. 26) and lubricate through fitting on the end of the driveshaft, (Part No. 93) Presses with Serial No. 52000 and above-remove plug (Part No. 91) from Bearing Cartridge (Part No. 1) and lubricate through fitting on end of driveshaft. (Part No. 92) Use Chevron SRI No. 2 grease. Reasseble parts that have been removed before operating press.

 A-13-K-1-A DOUBLE GEARED, TWIN END DRIVE SHAFT MOUNTED FLYWHEEL  
1Driveshaft Bearing Cartridge47Key
2Retaining Ring48Key (When Used)
3Bearing49R.H. Intermediate Shaft
4Retaining Ring50Brake
5Driveshaft 51Retaining Ring
6Key52Brake Hub
7Retaining Ring53Brake Adapter Plate Ring (When Used)
8Bearing54Hose Ring (When Used)
9Retaining Ring55Brake Adapter Plate
10Labyrinth Ring56Hose Ring
11"O" Ring57Bolt
12Drive Shaft Bearing Housing58L.H. Bearing Housing
13Key59Retaining Ring
14Clamp Collar60Bearing
15Bolt61Retaining Ring
16Bearing Retainer (When Used)62Key
17Bearing 63L.H. Intermediate Shaft
18Labyrinth Ring64Key
19Retaining Ring65"O" Ring
20Bearing Spacer66Retaining Ring
21Hose Ring (When used)67Bearing
22Bearing 68Retaining Ring
23Flywheel69L.H. Bearing Cartridge
24Clutch Hub70Capscrew
25Retaining Ring71Shrink Disc
26Clutch 72Main Gear
27Taper Lock Adapter (When Used)73Crankshaft
28Bolt74Bushing
29Coupling75Dowel
30Center Driveshaft76Bushing
31Capscrew (When Used)77Bushing
32Taper Lock Adapter (When Used)78Retaining Ring
33Bolt79Crankshaft Sprocket
34R.H. Intermediate Shaft Bearing Bracket80Main Gear
35Capscrew (When Used)81Shrink Disc
36Retaining Ring82L.H. Bearing Cap
37Bearing83Center Bearing Cap
38R.H. Intermediate Shaft Bearing Retainer84Bolt
39Spacer85R.H. Bearing Cap
40Capscrew 86Tapered Keys (When Used)
41Taper Lock Adapter or Shrink Disc (When Used)87Keyed Crankshaft (When Used)
42Intermediate Gear88Tapered Keys (When Used)
43R.H. Intermediate Shaft Bearing Cartridge89Sprocket (When Used)
44Retaining Ring90Retaining Ring (When Used)
45Bearing91Plug (When Used)
46Retaining Ring92Grease Fitting (When Used)
93Grease Fitting (When Used)
*Refer to FORM A-36 for removal and installation.

BCN Technical Services

1004 E State St  Hastings, MI 49058

Sign-up to receive sales, updates and important information from BCN Technical Services.

Hours of Operation Monday–Friday: 8 a.m.–5 p.m. Saturday–Sunday: Closed

BCN Technical Services, Inc. 1004 E State St Hastings, MI 49058
269-948-3300
info@bcntechserv.com